6.9 - Assign 3D objects to Features - 3D Visualizations

Assign Features to 3D objects

Assigning Features to 3D objects will make them visible or not visible during configuration. If you have linked a Feature to a 3D object, it must be active (selected, or mandatory) for the 3D object to be visible. It is also possible to link a 3D object to several different Features. In this case, all linked Features must be active before the 3D object is displayed. 3D object that is not assigned to a feature is always visible during configuration.

Assign 3D objects

1. In de 'Step Editor' go to the Table model.

2. Click on the 3D object for the rectangular table top made of wood with a length of 240cm.

3. Make sure the 3D object is selected in the Model browser. 

4. Right click on the selected object in the Model browser.

5. Click on 'Assign Feature' in the menu.

6. In the window that now appears, select the Features: Rectangle, Wood & 240cm.

The 3D object you assigned in the steps above will only be visible if a rectangular table top, made of wood with a length of 240cm is chosen during configuration.

Assignment

Now link the other 3D objects to the appropriate Features yourself. Tip: In the name of the 3D object you can see which Features to link.

Downlaod: Assigning 3D objects for the Table Configuration Model