Assign Features to 3D objects
Assigning Features to 3D objects will make them visible or not visible during configuration. If you have linked a Feature to a 3D object, it must be active (selected, or mandatory) for the 3D object to be visible. It is also possible to link a 3D object to several different Features. In this case, all linked Features must be active before the 3D object is displayed. 3D object that is not assigned to a feature is always visible during configuration.
Assign 3D objects
-
In de 'Step Editor' go to the Table model.
-
Click on the 3D object for the rectangular table top made of wood with a length of 240cm.
-
Make sure the 3D object is selected in the Model browser.
-
Right click on the selected object in the Model browser.
-
Click on 'Assign Feature' in the menu.
-
In the window that now appears, select the Features: Rectangle, Wood & 240cm.
The 3D object you assigned in the steps above will only be visible if a rectangular table top, made of wood with a length of 240cm is chosen during configuration.
Assignment
Now link the other 3D objects to the appropriate Features yourself. Tip: In the name of the 3D object you can see which Features to link.
Kommentare
0 Kommentare
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.